Cooler summer nights are right around the corner. If you’re planning on extending your season outdoors by enjoying those nights by the fire, you need to get your firepit ready for that first fire. Take a minute and grab a few tips from Mike on what basic maintenance steps you should take to make sure your firepit is performing at its best.
Video Transcription
Hi, I’m Mike from Lurveys. Thank you again for joining us. Today we’re in Des Plaines and we’re actually going to talk about our fire tables. What we’re going to do today is work on just basic maintenance. We’re going to talk about maintenance that you can do all summer into the fall when the leaves start falling and debris is coming. And this way you’re just going to make sure it stays properly clean and you can use it all Fall and even into Winter.
How do I prepare my Fire-pit for Fall?
The first thing you want to start with is you want to start removing the media [decorative lava rocks, colored glass, log sets, or fire pit stones] that’s inside, so you can start pulling it out. Now, once you’ve cleared all the media in the area where you’re going to use, you can come in here and you’re going to remove leftover debris. Sticks, leaves, extra dirt, you’re going to clear from the table. You’re also going to clear from the burners because if anything left in there, it’s going to cause buildup.
We’re going to do is after this, we’re going to focus on the burners and focus on water. Now that we’ve cleaned the debris out of the burners. Now we’re going to focus on water. Water is a big problem with burners because what it’s going to do is it’s going to cause propane bubbles and that can be harmful to the table itself and the people around you. What you want to do is if you can use compressed air and clear them out, because otherwise you’re going to see these bubbles come up. This is propane going through the water. Once we finish cleaning the burners, we can put the media back, and then we’re going to finish just on the body. You’re going to clean out the base underneath, make sure there’s no leaves or debris underneath. Once you’ve pulled that out, you might have some of this residue from a lot of rain. What you can do is actually use like a vinegar and water-based water based substance to actually just scrub this off and it gets a lot of it off.
Once you’re done, you finish this, you’re done with your maintenance. We recommend that you actually get some kind of a cover for it. That way, you don’t have to do as much maintenance over the Fall and over the Summer. It also protects the burners when you’re not using it.
That’s all you need! Again, thank you for joining us today. Please follow us on Facebook, YouTube, and Instagram for more videos to come.
