Description

Sure Klean® 600 is an acidic cleaner for brick, tile, and concrete surfaces. Sure Klean® 600 dissolves mortar smears and construction dirt quickly, leaving the masonry clean and uniform with no acid burning or streaking.

Advantages
o The No. 1-selling proprietary cleaner for new masonry.
o Proven effective through years of use.
o Recommended by many brick, tile, and mortar manufacturers.
o Supplied in concentrate for easy on-site dilution.
o Safer than muriatic acid for new masonry surfaces.
o Removes efflorescence on bricks, new concrete and new stone construction.
o Fast and easy to apply – use with cold water rinse.
o Special wetting agents let larger masonry surfaces be cleaned at one time, eliminating streaking.

Coverage Per Gallon
Concrete Pavers – 600-1100 square feet
Clay Pavers – 500-900 square feet
Unpolished Granite 600-1200 square feet
Unpolished Sandstone 600-900 square feet

Dilution
Dilute Sure Klean® 600 with 4-12 parts clean water to one part concentrate.

Application Instructions
1. Working from the bottom to the top, thoroughly prewet a large area with fresh water.
2. Apply the diluted solution freely from the bottom of the work area to the top.
3. Let cleaning solution stay on the wall for 3 to 5 minutes. Do not let cleaner dry into the masonry. This may leave residue or stains. Fresh water rinse the surfaces below areas being cleaned to prevent streaking.
4. Reapply cleaner and scrape off heavy buildup of excess mortar using a wooden scraper or piece of brick. Take care not to harm the masonry surface.
5. Working from the bottom of the work area to the top, rinse thoroughly with clean water, removing all cleaning compound, free sand, loose material and debris.
6. Reapply as needed following steps 1-5.